Replacement Parts List; Care And Maintenance; One-Year Limited Warranty - Whalen LWS48HBVW Manual

Vanity with top

Hide thumbs

Table of Contents

Available languages

ASSEMBLY INSTRUCTIONS

Step 4: Adjustable Shelf Installation

Note: The adjustable shelf is pre-installed for shipping. If the shelf

position is not to your liking, you will need to reposition the shelf by

following the steps below:

4a. Look under the shelf, and locate the wood screws holding the shelf to the

shelf supports.

4b. Remove the wood screws from each shelf support with a Phillips

screwdriver (not included).

4c. Remove the adjustable shelf from the vanity (B).

4d. Remove the shelf supports (FF) from the vanity (B) and re-position them

in the desired location. Make sure you place the shelf supports in the

same level so the shelf is not tilted.

4e. Place the adjustable shelf back onto the shelf supports.

4f. Using the Phillips screwdriver, reinstall the wood screws through the shelf

supports and into the shelf.

Step 5: Door Insert Panel Installation

5a. The door panels are reversible.

5b. The doors of this unit are shipped with the trim facing the front of the unit.

You can keep the doors as they are, or reverse the insert panel with the

flat panel forward, depending on the desired configuration.

CARE AND MAINTENANCE

• Dust the vanity regularly with a soft, non-lint producing cloth or household dusting product.

• You can clean the vanity with a gentle, non-abrasive household cleaner. Make sure to dry the wood immediately

with a soft cloth or towel.

• The marble top can be cleaned using standard marble cleaning agents (sold separately).

• Keep product away from direct sunlight as it may damage the finish.

ONE-YEAR LIMITED WARRANTY

This product is warranted to the original purchaser. If there is a failure in this unit due to defects in materials or workmanship,

the manufacturer will repair or replace this item at our discretion without charge. Warranty is void if product has been assembled

incorrectly, misused, abused by overloading, altered in any way or damaged due to accident. This warranty is not transferable

and does not cover chipping, flaking, scratches, rust, dents, or other damages to the surfaces of this product. Responsibility

of the manufacturer is limited to repair or replacement of this product. The manufacturer is not responsible for consequential,

incidental, or other damages or losses resulting from product failure.

This warranty is in lieu of all other expressed warranties. Some states do not allow the exclusion or limitation of incidental or

consequential damages, so the above limitation may not apply to you. This warranty gives you specific legal rights and you may

have other rights which vary from state to state.

Plastic Holder