Zanussi ZUS 6144 Instruction Booklet page 27

UPPER
SUPER.
D326
3. Fasten the side panel to the rear of the appliance
with the fixing brackets.
UPPER
SUPER.
E
D319
4. Fasten the appliance to the worktop or the sides,
applying the sealing strip between the appliance
and adjacent cabinet using the fixing brackets (E).
S.I.006
5. The appliance is equipped with adjustable support
feet. To adapt the appliance to the height of the
installation area (max 870 mm), screw in, or screw
out the feet situated in the four bottom corners.
LOWER
INFER.
6. Separate parts
LOWER
INFER.
E
7. Place guide on the inside part of the furniture door,
8. Fix cover (Hc) on guide (Ha) until it clips into place.
27
PR266
Ha, Hb, Hc, Hd
figure.
up and down as shown in the figure and mark the
position of external holes. After having drilled holes,
fix the guide with the screws supplied.
PR33
Hb
Ha
Hc
Hd
as shown in the
ca. 50 mm
90°
90°
ca. 50 mm
Ha
Hc