Introduction; Warnings / Notes - PiezoDrive PD32 Manual And Specifications

1 Introduction

The PD32 is a high-bandwidth, low-noise linear amplifier for driving up to 32 piezoelectric actuators. The
voltage range is configurable from +50V to +/-135V and includes asymmetric voltage ranges such as -15V
to +120V. The PD32 works seamlessly with common multi-channel DAC cards and is easy to use with
LabView and Simulink. The compact size and 19-inch rack compatibility provides a comprehensive off-the-
shelf solution for driving hundreds or thousands of piezoelectric actuators.
The PD32 is designed for demanding applications such as Adaptive Optics, Acoustic Beam Forming,
Materials Testing, Astronomy, Ultrasonics, and Vibration Control. With an output current of 150mA per
channel, a large array of piezoelectric actuators can be driven simultaneously at high frequencies. Positive
and negative high-voltage bias outputs are also included for compatibility with piezoelectric bender
actuators.
Each channel is individually protected against short circuit and thermal overload. Status indicators on the
front panel provide individual monitoring of all channels. A digital status signal and external shutdown
command is also accessible from the input connector to allow remote monitoring and control. The input
and output connectors are industry standard 37 Pin D-Sub connectors which are straight-forward to
assemble. Adaptors are available for industry standard 32 Channel DAC cards.

2 Warnings / Notes

This device produces hazardous potentials and should be used by suitably
qualified personnel under the supervision of an observer with appropriate
first-aid training. Do not operate the device when there are exposed
conductors.
PD32 V4 Manual
Compatible Actuators
Stack Actuators
Plates and Tubes
Two Wire Benders
Three Wire Benders
60V, 100V, 120V, 150V
up to +/-130V
up to +/-130V
Up to 130V, or +/-65V
3 15/02/2024