Breakout Board And Cable (Pd32-Breakout); Signal Adaptors - PiezoDrive PD32 Manual And Specifications

13 Breakout Board and Cable (PD32-Breakout)

A screw-terminal breakout board is included which connects to the amplifier via a Female DD78 connector
(TE 5748483-5) and HD78 Male-Male cable (2.5 ft). If required, the board can be mounted onto a base
structure using the installed M3 hex spacers.
14

Signal Adaptors

The signal adaptors allow a direct connection to common multi-channel DAC cards. Standard adaptors are
listed below; however, custom adaptors can also be created.
Manufacturer
National Instruments
National Instruments
National Instruments
National Instruments
The adaptors are mounted in-line with the cables from the DAC output card and PD32 input.
PD32 V4 Manual
Breakout Board
DAC Card
NI-5742 for FlexRIO
PCIe-6738, PXIe-6738
PCIe-6739, PXIe-6739
PCI-6723 and PXI-6723
Standard Signal Adaptors
Adaptor
PD-5742 Requires NI SHC68-C68-D4 VHDCI Cable
PD-6738 Requires NI SH68-C68-S Cable
PD-6738 Requires NI SH68-C68-S Cable
PD-6723 Requires NI SH68-C68-S Cable
12
Notes
15/02/2024