Zanussi ZWT 3002 User Manual page 45

WARNING !
The drain hose must never be stretched. If it is
too short, contact a tradesperson.
Electrical connection
This washing machine must only be connected
in single-phased 230 V.
Check the fuse size : 10 A for 230 V.
The appliance must not be connected with an
extension lead or multi-plug adaptor.
Ensure that the plug is earthed and that it is in
accordance with current norms.
Positioning
Position the appliance on a flat and hard surface
in a ventilated location. Ensure the appliance
does not come into contact with the wall or other
furniture.
To move the appliance, proceed as follows :
To
1
appliance, place it on its
rollers by pulling the
lever located at the base
of the appliance hard
from right to left. Once
the appliance is in the
desired position, push
the lever back to its original position.
Accurate levelling avoids vibrations, noise and
prevents the appliance from moving when run-
ning.
2
move your
3
45