Philips Saeco Map Caffitaly Bravista Latte+ Manual page 25

13 The orange service indicator light flashes and the white café latte
button lights up continuously when all the descaling solution has
been dispensed at the end of the descaling cycle.
14 Empty the bowl and drip tray and place the bowl and drip tray back.
15 Remove the water tank and rinse it under the tap, then fill it up to
the MAX level with fresh water. Place the water tank back onto the
machine.
16 Press the café latte button to start the rinsing cycle.
,The machine dispenses all the water from the water tank at regular
intervals through the coffee dispensing spout. The café latte button flashes
white during the entire descaling cycle.
17 When the rinsing cycle has finished, all lights flash 5 times and the
machine switches off.
18 Remove and empty the bowl and drip tray.
19 Place the metal cup tray back and slide the drip tray back into the
machine.
20 Rinse the milk carafe and water tank under the tap. Fill the water
tank up to the MAX level and place it back onto the machine.
Note: If after the rinsing cycle the orange service indicator light continues to
flash and the yellow lungo button lights up continuously, repeat steps 15-20
once more and make sure the water tank is filled up to the MAX indication.
Note: If you switch off the machine during the descaling or rinsing cycle by
unplugging the mains cord, you need to finish the descaling procedure before
you can brew coffee. Plug the mains cord back in. Press the on/off button
(green) to switch on the machine. If the espresso button lights up white
continuously, continue the descaling cycle by pressing the white espresso
button and follow steps 12-20. When the white café latte button lights up
continuously, continue the rinsing cycle by pressing the white café latte button
and follow steps 15-20.
The machine is now ready for use.
ENGLISH
25