Biostar H510MHP-E Manual page 18

PANEL: Front Panel Header
This 16-pin header includes Power-on, Reset, HDD LED, Power LED, and speaker connection.
SATA_1/ SATA_2/ SATA_3/ SATA_4: Serial ATA Connectors
These connectors connect to SATA hard disk drives via SATA cables.
Note
» » When using SATA SSD module on PCIE-M2_1 slot, the SATA_1 connector will be disabled.
Pin Assignment Function
1 +5V
2 N/A Speaker
3 N/A Connector
4 Speaker
5 HDD LED (+) Hard drive
LED
6 HDD LED (-)
7 Ground
Reset
Reset
8 button
control
Chapter 2: Hardware installation | 17
H510MHP-E
Pin Assignment Function
9 N/A
N/A
10 N/A
11 N/A N/A
12 Power LED (+)
Power
13 Power LED (+)
LED
14 Power LED (-)
15 Power button
Power-on
16 Ground button
Pin Assignment
1 Ground
2 TX+
3 TX-
4 Ground
5 RX-
6 RX+
7 Ground