Garland HT BEST 100 Instruction Manual page 16

English
Always use security gloves when unblocking the blade.
With the help of suitable tooling, remove the blocking
element from the blade.
To facilitate the cutting work to be done, the angle
of the blade can be changed. To change the working
angle:
- Turn the machine off.
- Press the security button A and without letting go,
press the blocking lever B to liberate the rotating
axis.
- Without letting go of either, turn the blade to the
working angle needed.
- Let go of A and B.
- Move the blade slightly to block the turning axis.
6. TRANSPORT
Hold the machine by the front handle when the
machine is not running and always at a safe distance
from your body. When transporting or storing the
machine cover the blade with a blade protector. A
proper use of the machine will result in a reduced
probability of accidental damages with the cutting
elements.
7. STORAGE
Always set the blade guard.
Clean the machine and the blade. After cleaning the
blade, place a small quantity of oil on the blade.
16/52