WARNING! Leaky and bursting stud ends!
For fittings, if a stud end that does not match the system of units, kind of seal and
size of the female thread is pressurized, the stud end may loosen itself or even
be ejected from the hole in a projectile-like manner. This can result in serious injury
and property damage. Hydraulic fluid can escape from this leakage point.
▶ Use the drawings (installation drawing) to determine the required stud end for
each fitting.
▶ Make sure the right fittings, mounting bolts and threaded plugs are installed.
▶ For all female threads, use a stud end from the same system of units and of the
correct size.
Port overview
Fig� 10: Port overview A15VLO with E2DR controller, clockwise rotation
Fig� 11: Port overview A15VSO with LRDRS0 control, clockwise rotation
Installation | A15VSO/A15VLO series 12
M
A
A
T
1
M
X
M
A
P
A
T
3
T
1
M
RE 92802-01-B/2023-03-27, Bosch Rexroth AG
P
T
3
S
T
2
S
T
2
37/60