Casio 5725 Operation Manual page 9

3.
Keep pressing (C) until the setting you
want to change is flashing.
Each press of (C) moves the flashing to
●
the next setting in the sequence shown
below.
Home City
Summer time
12/24-hour timekeeping
Seconds
Hours
Minutes
Year
Month
Day
Operation tone enable/disable
Illumination duration
4.
Configure the date and time settings.
To reset the seconds to 00: Press (D).
●
1 is added to the minutes when the
current count is between 30 and 59
seconds.
For all the other settings, use (B) and (D)
●
to change the flashing setting.
Holding down (B) or (D) scrolls through
settings at high speed.
Watch Operation Guide 5725
5.
Repeat steps 3 and 4 to select time and
date settings.
6.
Press (A) to complete the setting
operation.
Note
While the setting is being configured,
●
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.
Switching between 12-hour and 24-
●
hour Timekeeping
You can specify either 12-hour format or 24-
hour format for the time display.
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Hold down (A) for at least two seconds.
Release the button when the name of the
currently selected Home City appears on
the display.
This is the setting mode. The hands
●
automatically shift out of the way for
easy viewing of the display and other
indicators.
3.
Press (C) twice.
This causes [12H] or [24H] to flash on the
display.
4.
Press (B) or (D) to select [12H] (12-hour
timekeeping) or [24H] (24-hour
timekeeping).
12-hour timekeeping
5.
Press (A) to complete the setting
operation.
Note
While the setting is being configured,
●
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.
Home City
24-hour timekeeping
9