Mounting The Receiver Using The Rack Mount Kit - Sony STR-AZ7000ES Installation Manual

Mounting the receiver using the rack
mount kit
Make sure to use a "WS-RE2" dedicated rack mount kit for
this receiver when mounting the receiver on a rack mount.
1
Check that all parts are included.

Bracket × 2
Insulator

Blank panel × 1
Insulator

Screw
+P U10-32×3/4 (inch)*
× 8
* Select the correct screws according to the type of rack.

Washer × 8
2
Remove screws from the right side of the
receiver. Do not remove screws other than those
specified.
3
Mount the bracket on the right side of the
receiver in the order of the step numbers
printed on the bracket using the screws
removed in step 2.
10
EN

Screw
+T M5×18 (mm)*
× 8
4
Repeat steps 2 and 3 for the left side to mount
the bracket.
5
Mount the receiver to the rack system. Make
sure to perform this step with more than one
person.
6
Mount the blank panel.
(The blank panel is shaped so that the front
cover of the receiver can be easily detached, and
it also hides the legs of the receiver to give it a
cleaner look.)
Rack mount