LP/Propane to natural, you must use the conversion kit supplied by the for the proper installation of this kit. The manufacturer. When converting to Natural Gas, use the PRONGK1 kit for installation is not proper and complete until the 30”/36” / 42”/54” Grills, Power Burner and Side Burner models. When converting to LP/Propane, use the PROLPK1 kit for 30”/36”...
Page 3
IMPORTANT: PLEASE READ AND FOLLOW GAS PLUMBING REQUIREMENTS • A pressure regulator must be installed on all gas equipment. All local codes require that a pressure regulator be installed. Removing or failing to install the pressure regulator can result in fi re and serious bodily harm. •...
Page 4
Converting the Grill Burners Refer to the chart to install correct orifi ces. Outdoor Grills • Remove cooking grates and briquette trays. • Remove the main burners, lift up and then back, up and out. • Remove the sear burner and lift up and then back, up and out. •...
Checking for Gas Leaks WARNING To prevent fi re or explosion hazard, DO NOT smoke or allow any potential source of ignition (sparks, electrical arcing, etc) in the area while performing a leak test. Leak tests should be conducted outdoors only. Never conduct a leak test using fi re or fl ame.
Final Preparation Note: When the conversion is complete, place the labels below in the required locations. Conversion label Complete the informaion on this label with a permanent marker and place next to the rating label under the drip tray This appliance was converted on __________________day-month-year to _____________ gas with the ____________________________________(model number of kit used) Conversion Kit (name and address of organization making the conversion), which accepts the responsibility that this conversion has been properly made.