Table of Contents
Advertisement
To change the image
stored in the memory
Press the NO button or
the SOURCE/MEMORY
button to return to the
playback pictures. Press
the CAPTURE button
again to store a new
image. The previous
image in memory is
replaced with the new
one.
To change the split
number of the stored
image
The image stored in
4-SPLIT MULTI (or
16-SPLIT MULTI) mode
can be printed in
16-SPLIT MULTI mode (or
4-SPLIT MULTI). To
change the split number,
press the MENU button to
return to the main MENU
screen and select the
SPLIT again. Then select
the desired SPLIT mode.
You can also change the
4-SPLIT or 16-SPLIT to
NO SPLIT (full-size) mode.
An image stored in NO
SPLIT mode can be
printed in 4-SPLIT or
16-SPLIT MULTI mode.
Press the PRINT
button.
The playback pictures
appear on the screen.
Wait about 70 seconds
for a printout to emerge.
W® Printing...
When the printing is over,
Vv
Printing
is completed.
To stop printing (When
printing more than one
copy)
Press the NO button. The
printing stops after the
printing in process is
completed.
To store one image while
printing another
When you set the
CAPTURE MODE to
FIELD A or B, you can
store one image while
printing another. For
details, refer to "Storing
one Image while Printing
Another" on page 60.
To confirm the stored
image
Press the SOURCE/
MEMORY button. The
MEMORY lamp fights and
the stored image is
displayed on the screen
with the CONFIRM
message.
To select a different
sub-menu
Press the MENU button
and select the desired
item (sub-menu) on the
main MENU screen with
the {A} [¥) buttons.
Advertisement
Table of Contents
