Assembly Instructions For Z-Scale
Dodge Power Wagon
www.eaelec.com
Made in Canada
The DodgePower Wagon was
mechanically derived from the WC series
of 3/4 ton military trucks. Introduced in
1946 as the first post-war civilian
production 4x4 truck; it featured an
enclosed all-weather cab, an 8-foot cargo
box, 126 inch wheelbase and a 230
cubic-inch flathead inline-six engine. This
kit contains parts for 2 complete trucks.
3D printed parts Included in the kit (2 of
each):
A. chassis
B. cab/cargo box
C. spare tire
Required to complete the kit:
Paint - Gloss red, flat black, flat steel,
silver & glosscoat
Glue - Slow setting CA is best.
Tools Required:
1. X-acto knife with a sharp #11 blade.
2. #400 and #600 sandpaper.
WARNING: CHOKING HAZARD Keep
out of reach of small children!
Note that these ARE NOT TOYS, AND
ARE NOT INTENDED FOR USE BY
CHILDREN UNDER AGE OF 14. These
products are model railroad equipment
and accessories intended for use by
adults.
B
Page 1
Parts in the Kit
A
A
C
C
B