Eaelec TT Scale Studebaker US6 2 1/2 ton Cargo Truck Assembly Instructions

Assembly Instructions For TT Scale
Studebaker US6 2 ½ ton Cargo Truck
www.eaelec.com
Made in Canada
Decals Printed in the USA
Production of the US6 truck started in 1941
and over 200,000 were built during World War 2.
Over 150,000 were exported under the lend-lease
program mostly to Russia. The US military used
these trucks in the construction of the Burma Road
and in North America on the Alcan (Alaska) highway.
Parts Included in the kit:
A. 3D printed chassis.
B. 3D printed cab
C. 3D printed cargo bed
D. Decal
Page 1
WARNING: CHOKING HAZARD
Keep out of reach of small
children!
Note that these ARE NOT TOYS,
AND ARE NOT INTENDED FOR
USE BY CHILDREN UNDER
AGE OF 14. These products are
model railroad equipment and
accessories intended for use by
adults.
Required to complete the kit:
Paint - Flat black, silver, glosscoat, dullcoat
Paint - Flat army olive for US Army
(Testors 1165 or Tamiya XF49)
Paint - Flat army green for Red Army (Humbrol 76 or
Tamiya XF74)
Glue - Slow setting CA is best.
Tools Required:
1. X-acto knife with a sharp #11 blade.
2. #400 and #600 sandpaper.