Table of Contents
Related Manuals for MAC TOOLS JSA22D
Summary of Contents for MAC TOOLS JSA22D
- Page 1 Air Actuated Axle Jacks Operating Instructions & Parts Manual Model Number Capacity JSA22D 22 Ton JSA2235 (2-stage) 22/35 Ton JSA22D JSA2235 MAC TOOLS INC. 505 N. Cleveland Ave. Suite 200 Westerville, OH 43082 Printed in Taiwan JSA22D-M0...
-
Page 2: Product Description
PRODUCT DESCRIPTION Mac Tools Air Actuated Axle Jacks are designed for lifting, but not sustaining. They are designed to be used vertically. After lifting, loads must be immediately supported by appropriate means. Model JSA2235 is equipped with a 2 stage ram, which provides for a lower initial collapsed height. -
Page 3: Before Use
6. Check to ensure that jack rolls freely and that the air pump operates smoothly before putting into service. Replace worn or damaged parts and assemblies with Mac Tools Authorized Replacement Parts only. 7. This product is fitted to accept the popular 1/4" NPTF air nipple. When installing 1/4" NPTF nipple of your choice, ensure that thread tape or compound is used when servicing connections. -
Page 4: Operation
When not in use, store the jack with pump piston and overload may cause hydraulic system failure, which ram fully retracted. For model JSA22D, keep saddle and could cause severe personal injury and/or property adapter in saddle & adapter holder while not in use. -
Page 5: Troubleshooting
Ensure release valve tightly closed Overload condition Remedy overload condition Jack bleeds off after lift Hydraulic unit malfunction Contact Mac Tools Tech. Service Drain fluid to proper level Reservoir overfilled Jack will not lower after unloading Clean and lubricate moving parts... -
Page 6: Replacement Parts
Not all components of the jack are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence. When ordering parts, give Model number, serial number and parts description. Call or write for current pricing: Mac Tools Inc. 505 N. Cleveland Ave. Suite 200 Westerville, OH 43082. Tel: 1-800-MAC-TOOL (622-8665) Model JSA22D Ref. - Page 7 Release Valve Cable A22-6-1802-108 Spring Plate 522-2-0260-030 Return Spring 505-9-0092-207 Oil Filler Plug A22-1-1001-113 Power Unit( does not include 10 and 11) A22-3-9901-102 Repair Kit JSA2235-L0 Label (not shown) JSA22D-M0 Manual Figure 4 - Replacement Parts Illustration for Model JSA2235...
-
Page 8: One-Year Limited Warranty
ONE YEAR LIMITED WARRANTY For a period of one (1) year from date of purchase, Mac Tools Inc. will repair or replace, at its option, without charge, any of its products, which fails due to a defect in material or workmanship under normal usage. This limited warranty is a consumer’s exclusive remedy.