Table of Contents
Advertisement
Seagate Nytro WarpDrive 6301 Application Acceleration Card Quick Installation Guide
August 2013
Figure 1 Card Installation for the Nytro WarpDrive 6301 Card
4.
For highest performance, make sure that the PCIe slot is PCIe 3.0 and make sure that it has an electrical width of
8 lanes.
5.
Secure the bracket to the system's chassis. Install the bracket screw, if applicable, or engage the system
retention mechanism to secure the card to the system's chassis.
6.
Replace the cover, reconnect the power cords, and power up the system. Replace the server's cover,
reconnect the power cords, and reconnect any network cables. Turn on the power.
The ***ProductNameShort*** card hardware installation is complete.
NOTE
The shape, size, and locations of components on your
***ProductNameShort*** card might vary from this illustration.
CAUTION
The location must meet the 300 LFPM (linear feet/minute) minimum
airflow requirement.
NOTE
For all server types, do not ship the 6301 card installed or mounted
inside a server. Ship the card separately and install the card into the
server at its final destination. This prevents potential damage during
shipment. If the card is shipped installed in a server and is damaged
during shipment, the applicable warranty is void.
Seagate Technology
- 4 -
Advertisement
Table of Contents
