Getting Started; Inserting The Sim Card - Philips CT9A9MSLV Manual

Table of Contents

Advertisement

1. Getting Started

Please read the safety instructions in the "Precautions"
section before use.
To use your phone, you must insert a valid SIM card
supplied by your GSM operator or retailer. The SIM
card contains your subscription information, your
mobile telephone number, and a memory in which
you can store phone numbers and messages.

Inserting the SIM card

Follow the steps below to insert your new SIM card.
Remember to switch off your mobile phone before
removing the back cover.
Remove the back cover
To insert the SIM card, you must first remove the
back cover. Press on the back cover and then slide the
cover downwards as shown in the diagram.
Getting Started
Remove the battery
To remove the battery, pull up the battery from the
bottom left corner.
You may lose all your personal settings if you remove
the battery when the phone is switched on.
Insert the SIM card
Insert your SIM card under the metal clip holder,
until it stops. Make sure that the clipped corner of the
SIM card is aligned with the clipped corner of the
SIM card slot and that the gold contacts of SIM card
are facing downwards.
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xenium 99m

Table of Contents