Philips CT9A9MSLV Manual page 43

from a PC. The GSM connection parameters are
described in the table below.
Phone No.
This is the number your mobile phone
dials to establish a connection. First
ISDN No.
choose
Digital Network) or
(depending on your network operator)
and then enter the
provided by your operator.
Login
The login provided by your GSM
network operator to access this service.
Password
The password provided by your GSM
network operator to access this service.
Auto
Enter an inactivity time-out value after
disconnect
which the phone will automatically
end the call (if a connection was in
progress). The value must be over 30
seconds.
GPRS Settings
If using GSM connection is like a dial-up internet
connection, a GPRS connection would be the
equivalent of a broadband. GPRS (or Global Packet
Radio Service) is a protocol for sending data rapidly
using a radio signal.
42
(Integrated Service
Analogue No.
Phone number
To configure a GPRS connection, you may need to
provide a a user name and password, although some
GPRS connections function without them. You will
also need to provide the
Bearer
This menu option allows you to choose how to
establish an internet connection.
• GSM: your mobile will only use the GSM network
for e-mail connections.
• GPRS: your mobile will only use the GPRS network
for e-mail connections.
GPRS first: your mobile will first try to connect to
•
the GPRS network. If no GPRS network is
available, then it will use the GSM network.
For these features to work, you must first have entered
the corresponding settings.
Application settings
With application settings is set to ON, when you
reply an email, the original text will be quoted. If the
application settings is OFF, the original text won't be
quoted when an user replies an email.
APN
(or Access Point Name).
Messaging