Charging The Battery; Setting Hotkeys - Philips CT9A9HGRY Manual

If your phone detects any names
Copy SIM
and telephone numbers in the SIM
names into
card phonebook, you will be asked
the phone?
if you want to copy them into the
onboard phone book. If you wish
to copy the numbers, press OK,
otherwise press Cancel.

Charging the battery

Your phone is powered by a rechargeable battery. A
new battery is partially charged and a sound alert will
warn you when the battery reaches low, if the battery
alert is (see "Sounds alerts" on page 40).
On
Once the battery and battery cover are back in place
you can charge the phone. Pull away the protective
rubber cap covering the charger connector. Plug in the
connector as shown below. Then plug the other end
into a main AC power socket.
Getting Started
The battery symbol indicates the state of charge.
During charging, the charge indicators will scroll; it
takes around 2.5 hours to fully recharge your mobile
phone. When all the scroll bars are steady the battery
is fully charged. You can then disconnect the charger.
Depending on the network and condition of use, talk
time goes up to 8.5 hours and stand-by time up to
30 days.
Keeping the charger plugged to the mobile when the
battery is fully charged will not damage the battery.
The only way to turn off the charger is to unplug it,
so use an easily accessible AC power socket. You can
connect the charger to an IT supply (Belgium only).

Setting Hotkeys

You can configure the numeric keys
access your favourite features simply by long-pressing
on the numeric key. A number of hotkey shortcuts are
pre-configured. For
"Shortcuts" on page 45.
2 9
to
more information,
to
see
3