Replacing Fuse F1 - Miller LBP-350 Owner's Manual

6-2. Replacing Fuse F1

1
Push And Turn
Notes
OM-2807 Page 14
Pull Out And Push And Turn
Replace Fuse
! Turn Off welding power
source or stop engine on weld-
ing generator and disconnect
load bank input power plug
from receptacle.
See Parts List for size and rating of
fuse.
1 Fuse F1
Fuse F1 protects the Load Voltage
Jack Plugs from overload conditions.
If Fuse F1 opens, no voltage signal
will be present at the Load Voltage
Jack Plugs. Correct problem and re-
place F1.