Table of Contents
Advertisement
Calculator
You can carry out addition, subtraction, multiplication
and division operations with the calculator.
1. When you enter the calculator menu, press the
keypad to enter the numbers directly and start the
calculation (press # to enter decimal point).
2. Once you have finished entering the first set of
numbers, press + / - / < / > to enter the operants
*/-+.
3. Then, press the numeric keys directly to enter the
second set of numbers.
4. Lastly, press , to obtain the results.
5. Press * to change the display results or the
number you have entered into a positive and
negative number. For example, when it is a
positive number, press * to add "-" (negative
symbol) to the number, when it is a negative
number, press * to remove "-" (negative
symbol) from it.
The maximum length of the numbers and the result is
10 digits. The result of the calculator is indicative.
Tools
The keys are defined as follows:
Addition
Subtraction
Multiplication
Division
Equals
Enter decimal point
Options
Press L
to select:
Clear
Clear the calculator editing screen and
enter a new set of numbers (without
affecting the contents in the memory).
MC
Clear the memory.
MR
Recall the number in the memory,
whereby the recalled number will
remain stored in the memory.
MS
Store the displayed number in the
memory.
M+
Add up the displayed number and the
number stored in the memory and then
save the results in the memory.
>
<
+
-
,
#
79
Advertisement
Table of Contents
