Philips CT3621-000APMEA Manual page 32

Table of Contents

Advertisement

internet connection from a PC. The GSM connection
parameters are described in the table below.
This is the number your mobile phone
Phone
dials to establish a connection. First
number
choose
Digital
(depending on your network operator)
and then enter the
provided by your operator,
The login and password provided by
Login &
Password
your GSM network operator to access
this service.
Enter an inactivity time-out value after
Auto
which the phone will automatically
disconnect
end the call (if a connection was in
progress). The value must be over 30
seconds.
GPRS settings
If using GSM is like a dial-up internet connection, a
GPRS connection would be the equivalent of
broadband. GPRS (or Global Packet Radio Service) is
a protocol for sending data rapidly using a radio
signal.
To configure a GPRS connection, you may need to
provide a a user name and password, although some
Messages
ISDN
(Integrated
Service
Network)
or
Analogic
Phone number
GPRS connections function without them. You will
need to provide the
APN
Bearer
This menu option allows you to choose which how to
establish an internet connection.
• GSM: your mobile will only use the GSM network
for e-mail connections.
• GPRS: your mobile will only use the GPRS network
for e-mail connections.
GPRS
first: your mobile will first try to connect to
the GPRS network. If no GPRS network is
available, then it will try with the GSM network.
For these features to work, you must first have entered
the corresponding settings.
Email inbox
This menu allows you to connect to your mailbox and
download the e-mail headers (sender and subject
lines) from the server. You may then choose to retrieve
the corresponding e-mails.
1.
Select
> Email: your phone automatically
Inbox
connects to the e-mail server and downloads the
list of e-mail headers if any (five at a time).
2.
If
(or Previous) appears at the end (or
Next
beginning) of the list, other e-mail headers are
pending: select one of the available options and
press , to retrieve them.
(or Access Point Name).
31

Advertisement

Table of Contents
loading

Table of Contents