Table of Contents
Advertisement
them by selecting the corresponding icon or picture
on the screen.
This feature is also available from the main menu, in
Settings > Shortcuts > QuickCall.
Setting a Quickcall contact
1.
In idle mode, press+to access the
screen. Select a thumbnail to configure and press
, or L Set.
2.
Select a name in the contacts list, and press
again to access the
picture. Proceed the same way for each
thumbnail.
Calling a Quickcall contact
To make a call, press+when in idle mode, then
select the thumbnail of your choice and press (.
To reconfigure a thumbnail, select it and press , to
Replace
the name and/or picture.
If a picture is already associated with a contact, it is
displayed in the
Quickcall
picture in one of the menus will also update it in the
other.
10
Quickcall
and select a
Picture album
screen. Changing the
Handling multiple calls
The ability to handle two or more calls at one time
and to make conference calls is dependent on your
operator and/or subscription.
Making a second call
You can make a second call during an active call or
with a call on hold. While on the phone, dial a
number (or select a contact in the phonebook) and
press (. The first call is put on hold (the number is
OK
displayed on the bottom of the screen) and the second
number is dialled. You can then press
options among which are:
•
Switch calls
press<or>to switch calls).
•
to connect the two calls. You are
Transfer
disconnected when the transfer is completed.
•
to introduce the caller into a conference call.
Conference
Answering a second call
When you receive a second call while being already in
communication, the phone emits a beep alert and the
screen displays
Press(
Press)
OK
to toggle between calls (you can also
Call
waiting. You can then:
To answer the call (the first one is
put on hold).
To reject the call.
to access the
Calling
Advertisement
Table of Contents
