Bosch PXY601JW1E/48 Information For Use page 22

en Cookware test
Setting Description and options
ReStart You can use this function to set how
long the appliance saves the most
recently used settings when you
switch off the appliance.
Power limita- This enables you to limit the total
tion power of the hob, if required, due to
the circumstances of your electrical
installation. The available settings de-
pend on the maximum power of the
hob. You can find precise informa-
tion on the rating plate. If the function
is switched on and the hob has
reached the set power limit,
played and you cannot select a
higher power level.
Energy con- Shows the total energy consumption
sumption dis- in kWh between switching the cook-
play ing zone on and off.
The accuracy of the display depends
on various factors such as the
voltage quality of the power supply.
Cooking Add a new wireless cooking sensor.
sensor
Cookware test
23 Cookware test
The quality of the cookware affects the speed and the
result of the cooking process.
You can use this function to test the quality of the cook-
ware.
Before the test, ensure that the size of the cookware
base corresponds to the size of the cooking zone be-
ing used.
Access is via the basic settings. → Page 21
23.1 Carrying out Cookware test
As a single cooking zone, the flexible cooking zone is
set in such a way that only the individual item of cook-
ware is checked.
Home Connect
24 Home Connect
This appliance is network-capable. Connecting your ap-
pliance to a mobile device lets you control its functions
via the Home Connect app, adjust its basic settings
and monitor its operating status.
The Home Connect services are not available in every
country. The availability of the Home Connect function
depends on the availability of Home Connect services
in your country. You can find information about this at:
www.home-connect.com.
The Home Connect app guides you through the entire
login process. Follow the instructions in the Home Con-
nect app to configure the settings.
Tip: Please also follow the instructions in the
Home Connect app.
22
Setting
Setting the
boiling point
Cookware test
Appliance in-
formation
Factory set-
tings
22.2 Calling up basic settings
is dis-
Requirement: All cooking zones must be switched off.
Touch ⁠ .
1.
Drag your finger to scroll through the available set-
2.
tings.
To call up the submenu and select the required op-
3.
tion, touch a setting.
To return to the previous menu, touch ⁠ within a
submenu.
Before you exit the basic settings, save or cancel
4.
the settings in the confirmation screen.
Touch
5.
At room temperature, place the cookware with ap-
1.
prox. 200 ml water in the centre of the cooking zone
that best fits the base of the cookware in terms of
size.
Call up the basic settings and select the "Test cook-
2.
ware" option.
Follow the instructions on the display panel.
3.
a After 10 seconds, the result appears in the cooking
zone displays.
Note: To activate the function, return to the basic set-
tings and select Cookware test.
Notes
¡ Please note the safety precautions in this instruction
manual and make sure that they are also observed
when operating the appliance via the Home Con-
nect app.
→ "Safety", Page 2
¡ Operating the appliance on the appliance itself al-
ways takes priority. During this time it is not possible
to operate the appliance using the Home Connect
app.
¡ In networked standby mode, the appliance requires
a maximum of 2 W.
¡ Hobs are not designed to be left unattended. Al-
ways monitor the cooking process.
Description and options
You can enter your height above sea
level to improve the cooking sensor's
accuracy.
You can use this function to test the
quality of the cookware.
You can use this function to call up
information about the appliance.
Reset all settings to the factory set-
tings.
to exit.