Table of Contents
Advertisement
en Extended FlexInduction
Caution
Do not place cookware in the middle between the right
and left zones. The cooking zones are not activated
correctly and you do not achieve a good cooking res-
ult.
8.2 FlexInduction connect
By default, the FlexZone is configured as two separate
cooking zones. Switch on the following function to con-
nect the cooking zones:
Extended FlexInduction
9 Extended FlexInduction
With the extended FlexZone, you can cook with larger
cookware or position long cookware sideways on.
The extension always switches on in conjunction with
one of the two FlexZones. You cannot switch the exten-
sion on separately.
9.1 Position the cookware according to
weight and size
Position the cookware in the middle over the rear part
of the flexible cooking zone and its extension.
Depending on the size of the cookware and the
covered cooking surface, you can switch on the flexible
cooking zone as two separate cooking zones or as one
connected cooking zone:
MoveMode
10 MoveMode
You can use this function to change the power level for
an item of cookware by simply moving it within the
FlexZone. For this, the zone is divided into three areas
with different power levels.
10.1 Positioning and moving the cookware
Only use one item of cookware. The cooking area de-
pends on the cookware used, as well as its size and
positioning.
Each cooking area has a preset power level:
12
Set the cookware down on the cooking zone.
1.
Touch .
2.
lights up. The FlexZone is connected.
a
Notes
¡ You can change the default setting for the FlexZone.
You can find out how to do this in the "Basic set-
tings" section. → Page 21
¡ If you move or lift the cookware from an active con-
nected cooking zone, an automatic search starts.
Each item of cookware that is found within the cook-
ing zone during this search is heated at the previ-
ously selected power level.
8.3 FlexInduction disconnecting
Touch
.
▶
a The cooking zones are separate and work inde-
pendently of each other.
9.2 Activating Extended FlexInduction
Place the cookware on the cooking zone in such a
1.
way that it is also on the extended FlexZone.
Select the cooking zone and the power level. The
2.
area of the extended FlexZone is shown on the dis-
play.
a The function is switched on.
Note: If the extended FlexZone is not shown on the dis-
play, lift the pan and place it on the cooking zone.
9.3 Deactivating Extended FlexInduction
Select the cooking zone and set it to to 0.
▶
a The function is switched off.
¡ Front section = power level 9.0
¡ Middle section = power level 5.0
¡ Rear section = power level
.
Advertisement
Table of Contents
