Lenovo ThinkSystem SR250 V3 System Configuration Manual page 13

Hide thumbs Also See for ThinkSystem SR250 V3:
Table of Contents

Advertisement

Storage expansion
3
Available drive bays might vary by model.
• 2.5-inch models:
– Supports up to eight hot-swap SAS/SATA drives.
– Supports up to ten hot-swap SAS/SATA drives.
• 3.5-inch models:
– Supports up to four simple-swap SATA drives.
– Supports up to two simple-swap SATA drives and two NVMe drives.
– Supports up to four hot-swap SAS/SATA drives.
Expansion slots
Up to two expansion slots (depending on the server configuration):
• x16 PCIe riser:
– Slot 1: Not available
– Slot 2: PCIe Gen5 x16 in x16 slot, low profile
• x16/x8 PCIe riser:
– Slot 1: PCIe Gen4 x8 in x8 slot, low profile (open-end)
– Slot 2: PCIe Gen4 x8 in x16 slot, low profile
Notes:
• GPU adapters are only supported on servers with redundant power supply.
Graphics processing unit (GPU)
This server supports one GPU adapter in PCIe slot 2:
For a list of supported GPU adapters, see:
3.
When all eight storage drives have been installed, and the system has been set to software RAID mode in the UEFI
settings, regardless if the disks are configured as an array or as separate disks, drives 6 and 7 cannot be used to
install the Windows operating system.
https://serverproven.lenovo.com
.
Chapter 1
.
Introduction
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

7dcl7dcm

Table of Contents