Abstrakt Instruments VS-1 Assembly Manual page 17

Note: The 82-degree flat-head screws were specifically chosen to work with the recommended OLED. If using a different OLED a
different screw type may be required.
STEP 15: INSTALL OLED BEZEL & FRONT PANEL TEST FIT
https://youtu.be/hrL6ExcvNl0
(1pcs) 3M GPT-020F (blue) (Bag 25)
Cut two strips from the included 3M double-sided transfer tape and attach to the back of the front panel.
Attach the OLED acrylic bezel from the back side of the panel and test fit the panelboard. The front panel is machined and the
tolerances are tight. Make sure the switches, LED's and potentiometers are aligned well enough for the panel to fit. Be patient with
this step, it is likely that one or more parts may need to be adjusted.