Disposal And Recycling - EINHELL GC-SP 5511 IF Original Operating Instructions

8.1 Cleaning the paddle wheel
1. Unscrew the screws and remove the switch
housing (2) (Fig. 3).
2. Unscrew the screws on the bottom of the
pump and remove the intake cage (3) (Fig. 4).
3. Clean the paddle wheel with clear water.
Important! Do not put down or rest the
equipment on the paddle wheel!
4. Assemble in reverse order.
8.2 Maintenance
There are no parts inside the equipment which
require additional maintenance.
8.3 Ordering replacement parts:
Please quote the following data when ordering
replacement parts:
•
Type of machine
•
Article number of the machine
•
Identification number of the machine
•
Replacement part number of the part required
For our latest prices and information please go to
www.Einhell-Service.com

9. Disposal and recycling

The equipment is supplied in packaging to pre-
vent it from being damaged in transit. The raw
materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council offi ces.
10. Storage
Store the equipment and accessories in a dark
and dry place at above freezing temperature. The
ideal storage temperature is between 5 and 30
°C. Store the electric tool in its original packaging.
Anl_GC_SP_5511_IF_SPK7.indb 16 Anl_GC_SP_5511_IF_SPK7.indb 16
GB
- 16 -
02.02.2024 15:42:17 02.02.2024 15:42:17