Related Manuals for LIW HIRO BUGGY
Summary of Contents for LIW HIRO BUGGY
- Page 1 INSTRUCTIONS FOR USE Stroller for Special Needs Children HIRO BUGGY Revision 2 – 30/06/2023...
- Page 2 INTENDED FOR CHILDREN UNDER 1 YEAR OLD. ATTENTION! DO NOT EXCEED THE MAXIMUM LOAD OF THE HIRO BUGGY STROLLER. ATTENTION! DO NOT USE THE HIRO BUGGY STROLLER IF THERE ARE DEFECTIVE, DAMAGED OR MISSING PARTS. ATTENTION! WHEN USING THE HIRO BUGGY STROLLER AS A CYCLE TRAILER, CLOSE THE FRONT COVER WITH MAGNETS AT THE BOTTOM AND HOOK-AND-LOOP FASTENERS AT THE SIDES.
-
Page 3: Table Of Contents
4 Indications for use of the device ............................5 5 Technical specification ............................... 6 6 HIRO BUGGY Special Needs Stroller general design ......................7 6.1 HIRO BUGGY Special Needs Stroller seat components ....................8 6.2 HIRO BUGGY Special Needs Stroller frame components .................... 8 6.3 Lighting .................................. -
Page 4: Introduction
General conditions of safety The biggest concern for LIW Care Technology Sp. z o.o. is making sure that patients who use our devices are safe. In order to ensure the full safety of the device users, you need to comply with the following recommendations at all times: Before starting any attempts at using the device, read these instructions for use and if you have any doubts, contact the seller or the manufacturer. -
Page 5: Symbols
Indications for use of the device The HIRO BUGGY Stroller for Special Needs Children is dedicated to children who are no more than 130 cm tall. The stroller can be used in persons with faulty posture, muscular dysfunction or balance disorders. It proves excellent in children with cerebral palsy, muscular dystrophy, in paralysis of various etiology, tetraplegias and paraplegias, as well as in children with faulty posture. -
Page 6: Technical Specification
Technical specification Fig. 1 Parameter Unit Symbols Value Seat length 20÷27 Seat width 33,5 Angle ° 6/12/18/22/28 (112/118/125) A=12 Seat angle ° (106/112/119) A=18 (100/106/113) Page 6 HIRO BUGGY Stroller for Special Needs Children Revision 2... -
Page 7: Hiro Buggy Special Needs Stroller General Design
Unladed weight HIRO BUGGY Special Needs Stroller general design Fig. 2 HIRO BUGGY Special Needs Stroller cab Adjustable seat 20” wheel 8” front caster wheel 16” wheel mount 16” wheel HIRO BUGGY Stroller for Special Needs Children Revision 2 Page 7... -
Page 8: Hiro Buggy Special Needs Stroller Seat Components
Headrest Straps Hip belts Fig. 3 HIRO BUGGY Special Needs Stroller frame components Main frame Front frame Frame with push handle Backrest frame Seat frame Safety guards Fig. 4 Page 8 HIRO BUGGY Stroller for Special Needs Children Revision 2... -
Page 9: Lighting
Lighting The HIRO BUGGY Special Needs Stroller is equipped with red reflectors (1) located at the rear wheel axle level. In the front part of the stroller, there are white reflectors (3). In addition, there are orange reflectors mounted on the wheels (4). - Page 10 Then, you can start to fold the stroller. Move away the upholstery (1) where indicated in the picture, unlock the latches (2) that connect the front frame with the handle frame and release the handle position adjustment lock (3). Fig. 8 Page 10 HIRO BUGGY Stroller for Special Needs Children Revision 2...
- Page 11 (3), with the handle facing forward, under the bar of the front frame (2). Fig. 10 ATTENTION! When folding the frame, pay particular attention to potential pinch points created by the movable elements. HIRO BUGGY Stroller for Special Needs Children Revision 2 Page 11...
-
Page 12: Rear Wheel Lock - Parking Brake
Rear wheel lock – parking brake The HIRO BUGGY Special Needs Stroller is equipped with a parking brake that locks the right and left wheel simultaneously. Pressing the brake pedal (1) locks the brake pins in the openings of the wheel rosettes (2). The brake is released by moving the brake pedal (1) upwards. -
Page 13: Seat Adjustment
Lift” located under the front of the seat (Fig. 14). Every position will lock automatically. To put seat down release locking by puling blue stripe (3) “Tilt Release” and by the grey stripe get the sit down. After releasing blue stripe the seat will lock in nearest position. Fig. 14 HIRO BUGGY Stroller for Special Needs Children Revision 2 Page 13... -
Page 14: Backrest Angle Adjustment
After regulations make sure that pins are locked on both sides of seat Preparing for adjusting supporting elements For making adjustments on backrest easier in upholstery were specially made zipped flap on back of stroller cabin. Fig. 16. Page 14 HIRO BUGGY Stroller for Special Needs Children Revision 2... -
Page 15: Upper Strap Fastener Adjustment
The straps are equipped with plastic grommets for strap length adjustment. Their position needs to be adapted to the child’s body posture. In order to change the location of the strap buckle (3), readjust the strap attached in the plastic part of the seat under the upholstery. HIRO BUGGY Stroller for Special Needs Children Revision 2 Page 15... -
Page 16: Suspension Adjustment
Setting up sunshades and front upholstery The HIRO BUGGY Special Needs Stroller is equipped with black fabric sunshades allowing for restricting the access of light to the person sitting in the stroller. The front part of the sunshades is attached from the outside using hook-and-loop fasteners. It can be folded up and hidden in the pocket located on the top of the front upholstery. -
Page 17: Accessories
The height and width adjustment of the chest supports is possible after loosening the knobs located at the back of the backrest. After setting up the chest supports, tighten the knobs. Fig. 21 HIRO BUGGY Stroller for Special Needs Children Revision 2 Page 17... -
Page 18: Hip Supports
Fig. 22 Stabilising belt The stabilising belt (1) is designed to stabilise the pelvis and hips. The belt length is adjusted directly on the fastening buckles (2). Fig. 23 Page 18 HIRO BUGGY Stroller for Special Needs Children Revision 2... -
Page 19: Podnóżek
(2), slide out the headrest bracket (3), to which the headrest needs to be mounted. After setting the headrest position, tighten the knob (2). Fig. 25 HIRO BUGGY Stroller for Special Needs Children Revision 2 Page 19... -
Page 20: 16" Front Wheel
During the maintenance, perform a safety check of the stroller, which includes the condition of movable fixing points, fastening mechanisms and adjustments. The periodic maintenance of the device ensures long and trouble-free operation. Page 20 HIRO BUGGY Stroller for Special Needs Children Revision 2... -
Page 21: Storage And Transported
11 Handling the device Fig. 27 The HIRO BUGGY Special Needs Stroller should be handled two-handedly by two persons. Lift the device by fixed frame elements. The proper handling of the device is shown in Fig. 27. ATTENTION! Under no circumstances should you carry the device when it is occupied. -
Page 22: Nameplate Of The Stroller For Special Needs Children
According to the manufacturer, the useful life of the device is 5 years. • The post-warranty service is carried out by the manufacturer. Service contact details: LIW Care Technology Sp. z o.o., ul. Golfowa 7, 94-406 Łódź. www.liwcare.pl Tel.: 42 212 35 18 e-mail: reklamacje@liwcare.pl •... - Page 23 If it is found during the warranty period that the equipment is defective or damaged, the defect or damage shall be eliminate d free of charge by repairing or replacing the equipment. If only a part of the product needs to be replaced, the damaged part becomes a property of LIW Care Technology Sp. z o.o. and shall not be returned to the beneficiary of the warranty.