Page 1
MANUAL FOR CARETTA BUGGY Edition 1 – 2016-02-02...
Page 2
NOTE! THE MANUFACTURER IS SOLELY RESPONSIBLE ONLY FOR THE EQUIPMENT PURCHASED FROM A DIRECT REPRESENTATIVE OF LIW CARE TECHNOLOGY, OR IN SPECIALIZED MEDICAL SHOPS REPRESENTING LIW CARE TECHNOLOGY IN POLAND. Caretta Buggy Edition 1 p. 1...
Removing the front wheels ....................... 17 10.2 Removing the rear wheels ......................18 Moving the Caretta Buggy stroller around ................18 Detailed description of adjustment and structure of the Caretta Buggy ........19 12.1 Parking brake ..........................19 12.2 Backrest adjustment ........................19 12.3...
9. It is forbidden to transport the baby in the Caretta Buggy while driving a car – the seat of the buggy is not a car seat. The child cannot stay in the seat while driving.
In these instructions for LIW Care Technology Sp. z o. o. products, you will find information marked with „NOTE!” symbol. It is used to the draw reader’s particular attention to the text. It looks as follows: NOTE! THE SYMBOL IS USED TO DRAW THE READER’S ATTENTION TO THE TEXT WHICH IS MARKED WITH THIS SYMBOL.
Page 9
Height of the buggy when folded with wheels Width of the buggy when folded with wheels Length of the buggy when folded with wheels Maximum user’s weight 55 kg Weight of the buggy 23 kg Caretta Buggy Edition 1 p. 8...
5. Basic structure of the Caretta Buggy Fig. 1 General layout of the stroller 5.1 Standard equipment 1. Pushing handle 2. Back rest 3. Seat 4. Stroller frame 5. Front wheels, back wheels 6. Parking brake 7. Rear shock absorbers 8.
Page 11
5.2 Additional equipment (available on customer’s request) 1. Canopy 2. Cushion tapered seat 3. Sleeping bag 4. Headrest 5. Adjustable belts 6. Hip pelottes 7. Protective cover for seat pipes 8. Accesories bag Caretta Buggy Edition 1 p. 10...
6. Detailed assembly steps of the Caretta Buggy For the safety reasons, the stroller is delivered in parts, including: frame with a seat, wheels, windshields and back part with, or without the head stabilizer. In order to assemble the stroller, you...
Page 13
STEP 5: In order to properly install the windshield, first place the wind shield in socket 1. Then turn it around and lock it in clasp 2. Fig. 5 Stroller with the windshields installed Caretta Buggy Edition 1 p. 12...
Press clamp no. 1 and then slide the tubes no. 2 onto the protruding elements of the rest, until you hear a click. After the assembly is completed, slide on the No. 3 material. Fig. 7 Back rest with an adapter Caretta Buggy Edition 1 p. 13...
Fig. 8 Back rest with an head supports 8. Chest supports installation Press the clamp No. 1 and then insert the chest support into the hole, until it clicks in its place. Fig. 9 Chest supports installation Caretta Buggy Edition 1 p. 14...
STEP 1: Set the tilt angle to the horizontal position (press the red handle at the back of the back rest.) Fig. 10 Tilt angle adjustment STEP 2: Remove the chest supports (chest stabilizers). Press the clamp no. 1 and remove the support from its socket. Fig. 11 Chest supports dismantling Caretta Buggy Edition 1 p. 15...
Page 17
STEP 3: Dismantle the windshields. Press the red button on the side of the back rest and remove the windshields. Fig. 12 Windshields dismantling STEP 4: Pull the release elements and turn the handle to fold the stroller frame. Fig. 13 Collapsing the framework Caretta Buggy Edition 1 p. 16...
Fig. 14 Collapsing the back rest 10. Removing the wheels 10.1 Removing the front wheels Press the black plastic button from the top and then pull the front wheel to remove it. Fig. 15 Removing the front wheels Caretta Buggy Edition 1 p. 17...
Press the metal pin in the rear wheel, then pull to remove it. Fig. 16 Removing the back wheels 11. Moving the Caretta Buggy stroller around For safety reasons, the collapsed stroller needs to be carried while held by its frame.
12. Detailed description of adjustment and structure of the Caretta Buggy NOTE! After each adjustment, one needs to ensure that all of the adjustment elements are properly placed and secured. 12.1 Parking brake Fig. 18 Parking brake The back wheels are locked by the lever at the back bar of the framework. By pressing the lever, we block the back wheels.
12.4 Seat angle adjustment Fig. 21 Seat angle adjustment Holding the seat, press the red release lever (Fig. 21), setting the desired angle within the ⁰ ⁰ range between +1 and -23 Fig. 21. Caretta Buggy Edition 1 p. 20...
STEP 1: Press the blockade under the seat. Fig. 22 b STEP 2: Extend the pipe which supports the footrest. Fig. 22 c STEP 3: Install additional belt and install the seat upholstery element. Caretta Buggy Edition 1 p. 21...
Press the locking button and then pull the pipe, setting a proper height for the footrest. The adjustment range is between 27 and 37 cm. NOTE! The footrest is used to rest the feet on, the child should not stand on that element. Caretta Buggy Edition 1 p. 22...
Breast pelottes can be rotated upto 180⁰ degrees in order to increase the control range. For this function, unscrew the clamping knobs, turn pelottes and then screw back in the clamping knobs. Caretta Buggy Edition 1 p. 23...
Fig. 26 Footrest angle adjustment Loosen the lower adjustment screws, set a proper angle, lock these screws again. Fig. 26. It is ⁰ ⁰ possible to adjust the footrest angle, within the range between -20 ÷ 20 Caretta Buggy Edition 1 p. 24...
0 - 90 12.11 Adjusting the foot-rest platforms Fig. 28 Adjusting the foot-rest platforms Unscrew the four screws that secure the platform. Slide the platform at a suitable distance. After adjustment tighten the screws. Caretta Buggy Edition 1 p. 25...
The foam elements are covered with textile material covers. None of the Buggy’s external layers cause skin irritation. Caretta Buggy stroller, as any other medical device, shall be kept clean and shall be used in line with the manufacturer’s guidelines.
The economic lifetime of the product is five years. The manufacturer provides post – warranty service. Contact details: LIW Care Technology Sp. z o.o., ul. Golfowa 7, 94-406 Łódź, Poland. biuro@liwcare.pl Current contact details are available on: www.liwcare.pl...
17. Compliance with the safety requirements for medical devices Caretta Buggy meets the essential requirements of the MDD 93/42 EEC + 2007/47 / EC for medical devices. Caretta Buggy, in accordance with Annex IX of the MDD 93/42 EEC is non-invasive non-active I class medical device according to rule 1.
11. Warranty Repair or replacement will be made as far as possible within 30 days from the proper delivery of the product by the warranty user to LIW Care Technology Sp.