Page 1
MANUAL FOR MODI BUGGY Edition 7 – 2017-05-08...
Page 2
NOTE! THE MANUFACTURER IS SOLELY RESPONSIBLE ONLY FOR THE EQUIPMENT PURCHASED FROM A DIRECT REPRESENTATIVE OF LIW CARE TECHNOLOGY, OR IN SPECIALIZED MEDICAL SHOPS REPRESENTING LIW CARE TECHNOLOGY IN POLAND. Modi Buggy Edition 7 p. 1...
Structure of the Modi Buggy............................8 Detailed mounting description of Modi Buggy ....................... 10 Moving the Modi Buggy..............................11 Detailed structure and adjustment description of Modi Buggy ..................12 Unfolding the buggy’s frame ..........................12 Folding the buggy’s frame ............................. 13 Parking brake ................................
9. It is forbidden to transport the baby in the Modi Buggy while driving a car – the seat of the buggy is not a car seat. The child cannot stay in the seat while driving.
In these instructions for LIW Care Technology Sp. z o. o. products, you will find information marked with „NOTE!” symbol. It is used to the draw reader’s particular attention to the text. It looks as follows: NOTE! THE SYMBOL IS USED TO DRAW THE READER’S ATTENTION TO THE TEXT WHICH IS MARKED WITH THIS SYMBOL.
4. Weight and dimensions Modi Buggy Edition 7 p. 6...
Page 8
Wheel diameter (front) Wheel diameter (rear) Handle height 85÷117 85÷117 Maximum user’s weight 30 kg 30 kg Maximum load (user’s weight + additional 33kg 33 kg load) Weight of the buggy 20kg 20 kg Modi Buggy Edition 7 p. 7...
5. Structure of the Modi Buggy Fig. 1 Structure of the buggy The wheelchair consists of 1. Push handle 2. Back plate 3. Seat 4. Head supports 5. Side supports 6. Hip supports 7. Roll bar 8. Frame 9. Front wheels, Rear wheels 10.
Page 10
12. Footrest 13. Vest 14. Pelvic belts 15. Basket 16. Canopy 17. Leg cover 18. Rain cover 19. Bag 20. Umbrella 21. Table 22. Loins support (for size MINI only) Modi Buggy Edition 7 p. 9...
6. Detailed mounting description of Modi Buggy For safety reasons, your buggy is supplied in two parts: the frame of the buggy (8), and the seat (3). To install the seat, you should: STEP 1. Unfold the frame (8) (→ See 8.1, p. 12) STEP 2.
7. Moving the Modi Buggy For safety reasons, the buggy must be moved with its parts, separately the seat and separately the frame. Fig. 4 Correct manner of moving the buggy Fig. 5 Incorrect manner of moving the buggy Modi Buggy Edition 7 p.
8. Detailed structure and adjustment description of Modi Buggy NOTE! AFTER EVERY SINGLE ADJUSTMENT, YOU NEED TO MAKE SURE THAT ALL THE COMPONENTS ARE CORRECTLY POSITIONED AND LOCKED. 8.1 Unfolding the buggy’s frame Fig. 6 Unfolding the buggy’s frame Fig. 7 Lock You need to set the frame vertically Fig.
To release a wheel press a pin located in a wheel hub with your thumb inwards and remove the entire wheel from the axis. Follow the same steps with installation – press a pin and place the wheel on the axis, Fig 12. Modi Buggy Edition 7 p. 13...
YOU SHOULD INSPECT THE BRAKE AT REGULAR INTERVALS AND REMOVE POTENTIAL DIRT AND MUD. NOTE! YOU SHOULD BE CAREFUL CROSSING THE THRESOLD. NOTE! STABILITY OF THE STROLLER MAY BE AT RISK IN THE EVENT OF UNEXPECTED PUSH, TILTING OR LEANING ON IT. Modi Buggy Edition 7 p. 14...
(Fig. 16). You can adjust the height of the handle up to 85÷117 cm above ground. NOTE! PLEASE NOTE THAT EVERY SINGLE THING YOU PUT ON THE HANDLE AFFECTS THE STABILITY OF THE BUGGY. Modi Buggy Edition 7 p. 15...
DUE TO A VERY HIGH DEGREE OF ADJUSTABILITY OF THE BUGGY, THERE IS A POSSIBILITY TO SET A POSITION, WHERE THE HEAD IS PLACED BELOW THE PELVIS.IT IS FORBIDDEN TO USE THAT POSITION, BECAUSE IT MAY LEAD TO REGURGITATION OR CHOCKING. Modi Buggy Edition 7 p. 16...
Loosen all locking knobs Fig. 19. Fig. 20 Seat depth adjustment Pull the seat base to a desired position, Fig. 20, and then tighten the knob (1) until there is noticeable resistance. Fig. 19. Modi Buggy Edition 7 p. 17...
Fig. 22 Backrest height adjustment Unscrew the fixing screws (1) and the locking knobs Fig. 22 to set the desired height of the backrest in the range of 50÷65 cm. Then tighten the screws (1) and locking knobs. Modi Buggy Edition 7 p. 18...
Loins support adjustment In Modi Buggy size MINI, there’s an option of cambering the back support. To adjust loins support, you should loosen the knob 2 (fig. 23) and next – using the allen key 4mm – tighten the bolt 1, until we obtain back support required for the patient.
Loosen the 4 knobs Fig. 25, move the supports up to: 15÷27 cm. Fig. 26 Height adjustment Pellotes height adjustment possible in the range of 16÷30 cm for standard size and 14÷26 cm for the mini size (Fig. 26). Modi Buggy Edition 7 p. 20...
Loosen the locking knobs Fig. 28 and set the desired width of the head supports in the range of 15 to 20 cm and its height ± 2 cm Fig. 28. Then, tighten the locking knobs. Modi Buggy Edition 7...
Press the buttons on both sides simultaneously and set the required roll bar position, Fig.30. Fig. 31 Removing the roll bar Press the clip, firmly grasp the bar and pull it out, Fig. 31. Modi Buggy Edition 7 p. 22...
To mount the table, insert the table fastening adapters 1, then slide in the table using the tubes into the adapters. Tighten the knobs 2, to prevent the table from slipping out. Fig. 33 Table Angular Adjustment Modi Buggy Edition 7 p. 23...
Page 25
To remove the table, unscrew the knob (2) Fig. 34, then pull out the table. To remove the adapter, press the button (3), then pull up the adapters on both sides of the seat. Modi Buggy Edition 7 p. 24...
Push the leg cover under the seat upholstery and fasten using the Velcro (1), fasten the buckle (2) covering the push chair’s footrest. After placing the baby in the stroller, fasten the buckle (3) circumscribing the strap behind the back rest. Modi Buggy Edition 7 p. 25...
Canopy latches (1) should be inserted into the socket boxes on both sides of the seat. In order to dismantle canopy, press the latch lock (2) on both sides of the seat, and then pull out the canopy upwards. Modi Buggy Edition 7 p. 26...
Footrest supporting legs adjustment Fig. 40 Footrest supporting legs angle adjustment Press the two release buttons at the same time Fig. 40 then adjust the angle of the footrest brackets in the range: 0÷90⁰. Modi Buggy Edition 7 p. 27...
(Fig 42). Another end of the abduction belts should be installed inside the slots under the seat. The excess of the belts is used to install the vest. Modi Buggy Edition 7 p. 28...
(the belt is common for vest and abduction belts). Next they should be taken through the slots in the seats upholstery. Clampers should be installed on the edges of the straps. Fig. 44 Clips fastening Modi Buggy Edition 7 p. 29...
Page 31
NOTE! ALWAYS MAKE SURE YOU FASTEN THE CLIPS PROPERLY, USING ALL FOUR CLIPS, BECAUSE OTHERWISE, A LACK OF FASTENING MAY CAUSE THE CHILD TO FALL OUT OF THE BUGGY. Modi Buggy Edition 7 p. 30...
Foam-sponge inserts are connected to the structure. Foams are covered with a dust cover made from textile materials. None of the coatings cause skin irritation. Modi Buggy, like any other medical device, should be kept in necessary purity and used in accordance with the manufacturer's instructions.
The economic lifetime of the product is five years. The manufacturer provides post – warranty service. Contact details: LIW Care Technology Sp. z o.o., ul. Golfowa 7, 94-406 Łódź, Poland. biuro@liwcare.pl Current contact details are available on: www.liwcare.pl...
13. Compliance with the safety requirements for medical devices Modi Buggy meets the essential requirements of the MDD 93/42 EEC for medical devices. Modi Buggy, in accordance with Annex IX of the MDD 93/42 EEC is non-invasive non-active I class medical device according to rule 1.
Page 35
10. Warranty Repair or replacement will be made as far as possible within 30 days from the proper delivery of the product by the warranty user to LIW Care Technology Sp.