Juice MagTec 3 Quick Start Manual

The Juice® MagTec Wireless Charging Power Bank magnet will
lock into place and secure the bank to the back of your iPhone 12
(or newer model) for wireless charging. MagTec#3 is compatible
with all phones via its USB A & C ports and will allow around 3 full
charges of an average mobile. You can also charge THREE devices
at the same time, ready for when you need it most.
Contents
MagTec#3 power bank, USB C to USB A cable (for charging) and
User Manual
Overview
1. LED indicators
2. MagTec charging ring
3. USB C input/output charging port
4. USB A output charging port
5. Power button
How to charge the MagTec#3 power bank
Ensure to fully charge the MagTec#3 power bank before first use,
the LED will display five lights. Do this by charging and draining the
power bank 3 to 4 times, this will ensure the MagTec#3 is fully
optimised. To charge the MagTec#3 simply connect the supplied
USB C cable into the power bank and the other end into your
computer or to a mains plug (plug not supplied). The LED will flash
when charging, the LED will turn blue when fully charged.
Checking the remaining charge
Charge Time : 4 hrs (DC5V, 3A input)
To check the energy levels press the button on the side, the LEDs
will indicate the remaining power.
Note: It is normal for the MagTec#3 and your device to get warm
during charging. They may get even warmer if you use your device
to play videos or for gaming while charging.
Charging your gadgets
Always check the voltage your device can accept before
charging with any Juice product, this will ensure full
compatibility
1. Connect your device via the cable to the USB A or USB C port. You
are able to charge from two output ports & the MagTec ring at the
same time but the speed of charge will decrease for optimum safety.
For other devices and Apple devices you will need to use your original
cable that was supplied with your device, this will ensure compatibility.
2.
Press the power button to turn the
charge. Your device will show you when it is being charged via a
sound or on the screen. The number of lit LEDs will decrease to show
that power is being transferred from the power bank to your device.
3. When your device is fully charged or you want to stop charging,
disconnect the cable.
4. In order to charge your device(s), you will need a cable
compatible with your device.
5. Once charged, simply unplug your device and store your
MagTec#3 power bank until you are ready to use it again, ensure
to charge the power bank fully every 3 months to ensure it is kept in
optimum condition.
Charging your iPhone 12 & Newer with MagTec
Position your MagTec#3 in the central area on the back of your phone
and allow the magnets to lock on, the phone will begin to charge.
The effectiveness of the magnetic connection is weakened when using with a
protective phone case. Only original iPhone MagSafe® cases guarantee
compatibility with the magnets in the MagTec Wireless Charger. Third-party
magnetic cases can't guarantee full compatibility.
Made from 100% recycled plastics
19% of the material on this product is made from recycled post consumer waste plastic.
P O W E R B A N K
3
1
MagTec#3
Note:
Other mobile phones that
support wireless charging can
be charged by placing the
MagTec#3 flat on the table/desk
and positioning the central area
of the back of the phone onto
the MagTec Ring
Note:
10,000mAh
powerbank
4
on, now you can
2
5