Juice 3 Quick Start Manual

10,000mAh
powerbank
• Micro USB and USB C Input ports
• 2 x USB A Charging ports - Output (2.4A)
• USB C Charging port - Output (3A)

Contents

Juice®#3 power bank, Micro USB to USB cable (for charging) and
User Manual

Overview

1. USB A output charging port 1
2. Micro-USB input port
3. LED indicators
4. Power button
5. USB C input/output
charging port
6. USB A output
charging port 2
How to charge the Juice®#3 power bank
Ensure to fully charge the Juice®#3 power bank before rst use,
the LED will display four lights. Do this by charging and draining
the power bank 3 to 4 times, this will ensure the Juice®#3 is fully
optimised. To charge the Juice®#3 simply connect the supplied
Micro USB cable into the power bank and the other end into your
computer or to a mains plug (plug not supplied). The LED will
ash when charging, the LED will turn white when fully charged.

Checking the remaining charge

Charge Time : 5-6 hrs (DC5V, 2A input)
To check the energy levels press the button on the side, the LEDs
will indicate the remaining power.
Note: It is normal for the Juice®#3 and your device to get warm
during charging. They may get even warmer if you use your
device to play videos or for gaming while charging.

Charging your gadgets

Always check the voltage your device can accept before
charging with any Juice product, this will ensure full
compatibility
1. Connect your device via the cable to the USB A or USB C port.
You are able to charge from three output ports at the same time
but the speed of charge will decrease for optimum safety. For other
devices and Apple devices you will need to use your original cable
that was supplied with your device, this will ensure compatibility.
2.
Press the power button to turn the Juice®#3 on, now you can
charge. Your device will show you when it is being charged via a
sound or on the screen. The number of lit LEDs will decrease to
show that power is being transferred from the power bank to your
device.
3. When your device is fully charged or you want to stop charging,
disconnect the cable.
4. In order to charge your device(s), you will need a cable
compatible with your device. These come included as standard
when purchasing most devices. Plug the device's standard USB A
end in to the Juice®#3, then plug the other end of the cable into
the device you wish to charge.
5. Once charged, simply unplug your device and store your
Juice®#3 power bank until you are ready to use it again, ensure to
charge the power bank fully every 3 months to ensure it is kept in
optimum condition.
NOTE: Mobile and gadget device manufacturers have di erent
requirements to charge their products, they may also use di erent
cables to charge their devices. These manufacturers may vary the
speci cations of how to charge a device and they may also
introduce other charging methods on their new products,
therefore we can not guarantee that the Juice®#3 power bank will
be able to charge all devices. Juice® always suggests that you use
the original charging cable included with your device to charge.
Made from 100% recycled plastics
16% of the material on this product is made
from recycled post consumer waste plastic.
3
Juice® has built the Juice®#3
power bank with you in mind. Speed is
important when charging and when on
the go, the Juice®#3 will charge your
device at a speedy 3A and will allow
around 3 full charges of an average mobile.
This handy charger will also charge THREE
devices at the same time, ready for when
you need it most.
2
1
3
5
4
6