Advertisement
[ v ]
While the IJ printer ink circulates for operations, it reacts with atmospheric air elements and deteriorates with time.
Therefore, it needs periodic replacement. Each ink has several guideline for the ink replacement cycle. Also, since the proper
replacement intervals vary with the printer operating environmental conditions (temperature, humidity, dust, etc.). Please
determine the best replacement cycle in accordance with the obtained printing results, and replace all ink in the printer with new
ink.
[Note] The makeup must be filled to the printer within one year after opening the cartridge.
Note that basically the makeup filled to the printer needs no replacement.
(*1) UX2
: [Technical Manual] 5.3 Replacing the ink
UX/RX2: [Technical Manual] 6.3 Replacing the ink
[Guideline for ink replacement timing]
The day ink was filled to the IJ printer
*Please fill ink before "Expiration Date" comes. The date is described on cartridge/bottle.
Hours
for example: 1200 hours
operating
* See "Ink operating time" on IJ Printer screen.
IJ printer
Months since
filling ink
(or opening
* Please record the date ink was filled.
bottle)
[Remark] "Hours operating on IJ printer" and "Months since filling ink" are depend on Ink model.
Please refer to the attached document for each ink.
[ vi ]
If the IJ printer is not operated on regular basis, ink may stick in circulation system. If it sticks, error such as ink not ejecting and
ink can not be recovered are occur. To prevent these issues, refer to "IJ printer Stoppable period (*1)", and operate IJ printer (eject
ink from the nozzle) on a regular basis. The period that can be stopped depends on the storage temperature. Also, please note
that the period may be shorter dramatically depending on the usage environment(*2).
In case of long period shut down more than the term shown in "Stoppable period and Long-term shutdown", to operate "Long-
term shutdown" is necessary. This long-term shutdown prevents sticking by draining the ink in the IJ printer and filling makeup
(solvent) instead. Dedicated operation is required even when restarting. Please refer to the [Technical Manual (* 3)] for details of
the operation.
Maximum period possible to be continuously shut down without operation.
(*1)
it is necessary to operate it at least once during this period.
Please note that the ink may harden within a week if it is stored at 45 ° C or higher.
(*2)
(*3)
UX2
UX/RX2
UX(Twin nozzle)
UX-P
RX2
Since "Perform long-term shutdown storage work" requires special work, it is recommended to contact
your local distributor and ask for the work.
[Remark] "Days printer can be stopped" depend on Ink model.
Please refer to the attached document for each ink.
Guideline for the "Ink Replacement Cycle"
for example: 6 months
Stoppable Period and Long-term Shutdown
: [Technical manual] 6.16 Long-term shutdown
: [Technical manual] 6.16 Long-term shutdown
: [Technical manual] 6.15 Long-term shutdown
: [Technical manual] 6.15 Long-term shutdown
: [Technical manual] 6.14 Long-term shutdown
Precautions (Basic precautions)
Replacement
✔
Replacement
✔
CAUTION
Guideline of
Replacement timing is
whichever comes first
#NAME?
Advertisement
