Table of Contents
Advertisement
3.
For further assistance, go online for helpful instructional videos at bakcou.com
HANDLEBAR ASSEMBLY
9. Using 4mm Allen wrench, remove 4 screws from bicycle stem
10. After removing the front plate of bicycle stem insert center of
handle bars into bicycle stem and replace front plate and lightly
tighten 4 screws to secure handlebars.
11. Make certain handlebars are positioned with the throttle to the
left and the rapid-fire index shifting levers on the right. Slightly
insert each of the 4 screws prior to tightening. Also, prior to
tightening, rotate handlebars forward or backwards to customize
position of handlebars to rider. Once handlebars are in desired
position, secure the screws for the handlebars. Note: Most
often brake levers should be angled approximately 45 degrees
downward for optimal positioning.
12. Display screen can easily be rotated by hand, moving forward
or backwards, to accommodate rider's desired position. To
adjust the display, you will need to loosen the screws on each
side of the display.
Advertisement
Table of Contents
