Operating Modes - Emerson EK-6002 User Manual

OPERATING MODES

CD & CD+G
CD+Gs, or CD+Graphics, are CDs that are specially formatted for use with karaoke
machines. In addition to the audio tracks, they contain graphics and text for lyrics
that will appear on the screen while the CD is playing.
Switching the unit to CD+G mode will activate the screen and display lyrics from the
loaded CD+G. You must set the source to match the type of disc you wish to play. CD
mode should only be used to play CDs. Likewise, CD+G mode should only be used to
play CD+Gs.
LOADING & PLAYING A CD
1. Open the CD door.
2. Load a CD or CD-R/RW disc into the karaoke machine, label side facing up.
3. Close the CD door.
4. Set the Source Switch on the front of the unit to CD+G mode.
5. Press the Play/Pause button to begin playing the loaded CD.
LOADING & PLAYING A CD+G
1. Open the CD door.
2. Load a CD+G disc into the karaoke machine, label side facing up.
3. Close the CD door.
4. Set the Source Switch on the front of the unit to CD+G mode.
5. Plug a microphone (one included) into the Mic 1 or Mic 2 inputs.
6. Press the Play/Pause button to begin playing the loaded CD+G.
PROGRAMMING A LOADED CD OR CD+G
NOTE: The procedure for programming either disc type is the same.
1. Press the Stop button to stop a loaded disc.
2. Press the Program button.
3. Press the Skip/Search buttons to select a track from the loaded disc.
4. Press the Program button to add the selected track to the program.
5. Repeat steps 3 and 4 to program up to 20 tracks to play in a specified order.
6. Press the Stop button to cancel a program.
9