Emerson EK-6002 User Manual page 10

AUTOMATIC VOICE CONTROL
Automatic Voice Control allows the karaoke machine to compensate for irregularities
in the microphone voice input.
It also serves to blend or separate the user's voice from the recorded vocals on an
audio track.
To Activate Automatic Voice Control
NOTE: AVC only works when someone is actively singing into the microphone.
1. Press the AVC button.
2. To manually adjust voice control, use the Echo and Balance knobs on the front of
the unit.
PAIRING A BLUETOOTH DEVICE
1. Power on the unit by pressing the Power button.
2. Set the Source Switch on the front of the unit to
button. The pairing indicator will flash blue quickly. When pairing, remain within 3
feet of the unit.
3. Using the native controls on your Bluetooth® device, select the EMERSON EK-6002
in your Bluetooth® settings to pair. If your device requests a password, enter the
default password 0 0 0 0. Refer to the user's manual for your specific device for
instructions on pairing and connecting Bluetooth® devices.
4. When successfully paired and connected, a beep will be emitted from the unit, and
the Pairing Indicator will display a solid blue light.
5. After the initial pairing, the unit will stay paired unless unpaired manually by the
user or erased due to a reset of the device. If your device should become unpaired
or you find it is unable to connect, repeat the above steps.
6. Only one Bluetooth® device can be paired at a time.
PLAYING BLUETOOTH AUDIO
1. After pairing to a Bluetooth® device, use the native controls on the connected
Bluetooth® Device to select a track.
2. Play, pause, or skip a selected track using the native controls on the connected
Bluetooth® Device or the controls on the karaoke machine.
3. Audio played through the connected Bluetooth® device will now be heard through
the speakers.
and press and hold the Pair
10