Proper Use; Layout And Items Supplied; Technical Data - EINHELL TE-CD 18/2 Li-i Original Operating Instructions

household refuse.
The rechargeable battery should be taken to a
suitable collection center for proper disposal. If
you do not know the whereabouts of such a coll-
ection center, you should ask in your local council
offi ces.
To ensure that any defective/damaged lithi-
um-ion batteries are properly packaged and
delivered when you send them to us, please
contact our customer service or the point of
sale at which the equipment was purchased.
When shipping or disposing of batteries and
cordless tools, always ensure that they are
packed individually in plastic bags to prevent
short circuits and fi res.
Do not lose these safety instructions

2. Layout and items supplied

2.1 Layout (Fig. 1)
1. Torque selector
2. Battery capacity indicator
3. Changeover switch
4. ON/OFF switch
5. Battery pack (not supplied)
6. Battery charger (not supplied)
7. Selector switch for 1st/2nd gear
8. Pushlock button
9. Quick-change drill chuck
10. LED lamp
11. Selector switch for driving/drilling/impact dril-
ling
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made bought the product
within the maximum days indicated by the con-
sumer protection laws of your country and upon
presentation of a valid bill of purchase. Also, refer
to the warranty table in the service information at
the end of the operating instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
Anl_SA_TE_CD_18_2_Li_i_SPK7.indb 9 Anl_SA_TE_CD_18_2_Li_i_SPK7.indb 9
GB
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Cordless Impact Drill
•
Original operating instructions

3. Proper use

The cordless drill/screwdriver is designed for tigh-
tening and undoing screws, as well as for drilling
in wood, metal and plastic.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

Voltage supply: .....................................18 V
Idling speed: ............... max. 0-350 / 0-1250 r.p.m.
Number of percussions: . max. 5250/18750 p.p.m
Torque settings: ....................................... 18+1+1
Forward and reverse rotation ..........................yes
Chuck clamping width: ..................max. 2-13 mm
Max. screw diameter: .................................. 6 mm
Weight........................................................ 1,1 kg
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
- 9 -
07.12.2023 08:22:51 07.12.2023 08:22:51