Brother P-Touch PT-150 User Manual page 31

After you have chosen the character size, print style, and
tape feed style, you are ready to print the label.
To print a label:
Press the PRINT key.
The printed label comes out of the tape exit slot on the side
of the machine.
Example To print the message onto a label:
A label reading "J. SMITH" written in Double Width
& Double Height Outline characters will be printed.
To cut the tape:
Pull out the tape cutter lever on the side of the machine.
Note: Do not pull on the tape. This may damage the tape
cassette.
If you pull out the tape cutter lever too far, it may
break. Be careful not to pull it past the line on the le-
ver.
Do not attempt to cut the tape during printing or
feeding.
To cut the label:
@ Pull out the tape cutter lever.
-27-