Brother P-Touch PT-150 User Manual page 10

A tape cassette is supplied with this unit.
To insert a new tape cassette:
(1)
(2)
(3)
(4)
(5)
Turn the machine over. Remove the tape cassette
compartment cover by pressing in the scored portion
and lifting.
If there is an empty tape cassette in the compartment,
pull up the release lever. Pull the used tape cassette
Straight up to remove it.
Remove the stopper from the new tape cassette. Use
your finger to wind it in the direction of the arrow on
the case two full times.
Insert the new tape cassette firmly into the compart-
ment. Push down the release lever to lock the tape
into place. Replace the compartment cover.
Advance the tape by holding down the CODE key and
pressing the FEED key once.
Note: When inserting a tape cassette, make sure that the in-
ner ribbon does not get caught on the corner of the
metal securing stand.