Car Test Operations; Cursor Measurement - Launch EM101 Manual

LAUNCH

3.2.5 Car Test Operations

This function provides all kinds of the testing applications on the automotive parts (including circuits,
sensors, actuators, ignition etc.) and detailed connection methods.
Tap Car test and the following screen will appear:
Tap to select the desired automotive part, the system will automatically configure the option to the preset
parameters. The user does not need to make any settings. Just follow the on-screen instructions to make
connections and proceed.

3.2.6 Cursor Measurement

The Cursor function can be used for assisting in measurement.
Tap / to turn on the cursor function and place the cursor on the measurement point to read the
waveform measurement value.
There are two types of cursors: horizontal cursor and vertical cursor. The horizontal cursor measures the
value in the vertical direction, and the vertical cursor can measure the value in the horizontal direction.
When set to ON, two horizontal/vertical reference lines named with Y1 & Y2/X1 & X2 will be displayed on
the waveform display area. The user can use
directly to move it.
Tap / again to turn it off.
EM101N New Energy Oscillograph Multimeter User Manual
/ or /
17
to fine tune the line or drag the line