Advertisement
m a m
Various Ways of Using
Refer to the operating manual of each equipment for more details.
to LINE OUT (CPA-3/4)
to
REMOTE (CPA-SRM)
For analog signal
Supplied connecting cord or
RK-G129 (not supplied)
fo LINE IN
to MIC
[Gest
foe > ae
RK-G134 (not supplied)
For digital signal
to optical i
Amplifier equipped with
oo
Optical digital input
DA converter unit, etc.
POC-MZ1 *(not supped)
to OPTICAL (DIGITAL) IN
[Rasnbmser IS
* When using a unit equipped with the rectangular shaped optical jack, use the digital connecting cable
POC-MZ1 (not supplied), and when using a unit equipped with the optical minijack, use the digital
connecting
cable POC-MZ2 (not supplied).
Notes on connection
¢ Battery life becomes shorter when the digital connecting cable is connected to the
OPTICAL (DIGITAL)/LINE OUT jack. When you do not use the digital connecting cable,
disconnect it from the jack.
© Optical digital signal is not output when the ESP system is active.
¢ Turn off each equipment before making connections.
* Plug in the white plug to the t (left channel) jack, and the red plug to the R (right
channel) jack.
'
* Do not connect the output from LINE OUT with the PHONO jacks of the amplifier.
¢ Make sure to insert the plugs of the cable firmly into the jacks. A loose connection may
cause a humming noise.
° If the unit causes interference to the radio or television reception, turn off the unit or
move the unit away from the receiver.
Advertisement
