Advertisement
On display window
When you press >it (when RESUME Is set to
Example
OFF)
The total number of the tracks in the disc and the
total playing time appear for 2 seconds.
é
Total number
Total playing time
of the tracks
During play
The track number and the elapsed playing time of
| ogg grit
the current track appear.
1 min, 17 sec. has elapsed
from the
beginning of the fifth track.
During pause
The elapsed playing time of the current point
oS
3% re
flashes.
UF
EGS
Pause mode at the point 1 min. 17 sec.
from the beginning of the fifth track
Between the tracks
The "= to the beginning of the next track will
3 3 -00:82
2 sec. to the beginning of the 3rd track
ee
vs
eerie tye ete Seuiee
it ldeaisige eigen ices
Press to select the function of OSP according to the contents of your disc or where to use
the unit.
BASS a BASS aa: The bass sound will be boosted more powerfully.
BASS am is more effective
than BASS a.
if you set the volume too high, the sound may be cracked or distorted. If this happens,
tum down the volume.
VOCAL: Sound of the middie frequency range is emphasized and human voice becomes
more audible.
CAR: inaudible sound will be boosted for better audibility. This is useful when listening at
noisy places.
* DSP: Digital
Signal Processing
Notes
© The bass boost, or CAR effect may be decreased according to the output level of the recorded sound.
© While playing back the track with fast tempo or the track with narrow dynamic range, the CAR position
may not give efficient
effect.
¢ OSP also works on line output from the OPTICAL (DIGITAL)LINE OUT jack. Thus, adjustment
of DSP
is also possible when listening through the extemal speakers or when recording on the cassette
recorder.
OSP does not work on optical digital output from the OPTICAL (DIGITALVLINE OUT jack.
¢ DSP is retained as long as the power is connected.
Display indication
changes as follows.
FP 459 a 5455 emt VOCAL Mh CAR mP nscaton
1 Press PLAY MODE during play until "RMS"
ue.
flashes in the display window.
2 Press t4€<4 or PPI to select the desired track.
Pads
You can program the tracks in the desired order
geo
regardless of their track numbers.
Desired track
The first
number
selection
3 Press REPEAT/ENTER'.
The 2nd (next) selection
4 Repeat steps 2 and 3 (up to 22 selections).
If another track is memorized after 22 tracks have been memorized, the first track will be
cleared and the new one will be memorized in its place.
5 Press Pit.
"RMS" stops flashing and play starts.
To repeat program play, press REPEAT/ENTER.
Press PLAY MODE again to resume normal play.
* When the REPEAT/ENTER button is pressed for more than 1 second, the total number and the total
'
time of the programed tracks will appear in the display window while the REPEAT/ENTER button is
pressed.
\f a disc contains 32 tracks os more and you wish to program the 32th track or a track after that, or if the
total playing time exceeds 100 minutes, the total playing time of the program will not be displayed.
(": - -:+-* indication will appear instead.) However it is possible
to program such tracks.
Advertisement
