Sony ULT FIELD 1 Help Manual page 43

Table of Contents

Help Guide

Wireless Speaker

ULT FIELD 1

Listening to music wirelessly with 2 speakers (Stereo Pair function)

To use the Stereo Pair function, 2 ULT FIELD 1 speakers are required. By connecting 2 speakers via a BLUETOOTH

connection, you can enjoy more powerful sound.

2 speakers connected via a BLUETOOTH connection play sounds in stereo, where 1 speaker plays the sound on the

right channel (right side) and the other plays the sound on the left channel (left side).

Before operating the speaker, make sure of the following:

Update the pre-installed software to the latest version on each and every speaker to connect for the function.

(For details about the update procedure, see

When setting up the speakers for the Stereo Pair function, make sure that the 2 speakers to connect for the function

are located within 1 m (3.2 ft) from each other. Stop music playback if it is in progress.

When playing music, make sure that all of the devices to connect for the function are located within 30 m (98.4 ft) in

your line of sight.

Maximum communication range may shorten under the following conditions.

There is an obstacle such as a person, metal, or wall between the speaker and BLUETOOTH device.

A wireless LAN device is in use near the speaker.

A microwave oven is in use near the speaker.

A device that generates electromagnetic radiation is in use near the speaker.

Use "Sony | Music Center" to set up the speaker for the Stereo Pair function.

For details about "Sony | Music Center," refer to the following URL:

https://www.sony.net/smcqa/

To terminate the Stereo Pair function

Use "Sony | Music Center."

Hint

Use of the Stereo Pair function automatically switches the codec to SBC.

Turning off the speakers does not turn off the Stereo Pair function. When one of the speakers is turned back on, it attempts to

establish a connection for the Stereo Pair function. To use the Stereo Pair function, turn on the other speaker within 1 minute.

Note

To avoid any sudden loud sound output from the speaker, turn down the volume of the speaker and a BLUETOOTH device or

stop the playback on the BLUETOOTH device before establishing a connection with the BLUETOOTH device.