Sony ULT FIELD 1 Help Manual page 28

2.
Click [Devices].
3.
Select [ULT FIELD 1] under "Audio" on the [Bluetooth & other devices] tab, and then click [Connect].
The icon on the screen may look different from what you actually see.
When a BLUETOOTH connection is established, [Connected music] or [Connected voice, music] will be
displayed on the screen. Proceed to step
Follow the on-screen instructions to establish a BLUETOOTH connection.
7
When the BLUETOOTH connection is established, you hear the notification sound from the speaker and the activity
of the (BLUETOOTH) indicator changes from flashing to lit.
If the connection attempt fails, repeat the procedure from step
Hint
The above instructions on the computer are provided as an example. For details, refer to the operating instructions supplied with
your computer. In addition, not all the computers are tested and found compatible with the above procedure and the procedure is
not applicable to home-built computers.
Note
The pairing mode of the speaker is released after about 5 minutes and the (BLUETOOTH) indicator flashes slowly. However,
when the speaker has no pairing information, such as at the factory settings, the pairing mode is not released. If the pairing mode
is released before finishing the process, repeat from step
Once BLUETOOTH devices are paired, there is no need to pair them again, except in the following cases:
Pairing information has been deleted after repair, etc.
The speaker is already paired with 8 devices and another device is to be paired.
The speaker can be paired with up to 8 devices. When a new device is paired in addition to 8 paired devices, the pairing
information of the earliest device connected via a BLUETOOTH connection is replaced by the information of the new one.
.
.
.
28