Download Print this page

PAL EVENGLOW Installation Manual

Pool and spa light

Advertisement

Quick Links

POOL AND SPA LIGHT
INSTALLATION MANUAL
CONCRETE/GUNITE

Advertisement

loading

Summary of Contents for PAL EVENGLOW

  • Page 1 POOL AND SPA LIGHT INSTALLATION MANUAL CONCRETE/GUNITE...
  • Page 2: Tools Required

    CONTENTS PAGE Guides and Warnings Nicheless Installation Connecting Light Connecting to driver Troubleshooting Terms and Conditions GUIDES AND WARNINGS Tools Required: Phillips Head No. 2 Screw Driver IMPORTANT INFORMATION: DO NOT CONNECT THIS 12V LIGHT DIRECT TO A 120V CIRCUIT. 1) Ensure that the electrical system for your pool conforms with all the requirements of the National Electrical Code (NEC) and all relevant local codes and ordinances.
  • Page 3 NICHE INSTALLATION Securing to steel bars Secure niche to steel reinforcing bars using wire in 4 positions 20 or 25mm conduit using PVC solvent cement Wipe around niche perimeter and fill with 2 pack bonding to seal plastic to concrete 50mm (MIN) 70mm (MAX) CONCRETE...
  • Page 4 NICHE INSTALLATION Installation of cable 1. Remove Niche protective cap 2. Draw cable through conduit Niche installed in wall Cable and plug assembly 3. Tighten cable nut by hand only N.B. Do not remove protective cap until installation of light Rubber Grommet Cable nut...
  • Page 5 NICHE INSTALLATION Pool Finish and Rendering Apply PVC solvent cement to render ring Fit rendering to concrete niche. Adjust render ring for flush finish N.B. Do not remove protective cap until pool finish is applied Apply finish to top edge render ring max 22mm Pool Finish 22mm(MAX)
  • Page 6: Final Installation

    NICHE INSTALLATION Final Installation Mount light to niche by tilting into bottom lip and securing with screw at top. DO NOT USE ELECTIC DRILL. WATER LINE Install conduit to power supply 70mm(MAX) 50mm (MIN) Sealant Concrete reinforcing bars Pool Finish 22mm(MAX) 12mm (MIN) 50mm MIN...
  • Page 7 CONNECTING TO DRIVER PAL COLOR TOUCH DRIVER The Bubbler is powered by the PAL PCR-1Z / PCR-2Z Class 2 LED Driver Refer to PCR-1Z or PCR-2Z for Detailed Installation Instructions. 64-PCR-2Z 64-PCR-1Z PCZ-2 Transmitter Switch 1 Switch 2 Switch 3...
  • Page 8: Troubleshooting

    TERMS AND CONDITIONS PAL PRODUCT WARRANTY DETAILS The PAL product is guaranteed against defects in materials and/or workmanship, under normal domestic use for (12) twelve months. Except as otherwise provided for by law, this guarantee becomes invalid if in the opinion of the...