MTD 247-640A Owner's Manual page 5

Hide thumbs Also See for 247-640A:
Table of Contents

Advertisement

FIGURE 7
NOTE
After
engine
has
been
serviced,
finish
filling
oil
reservoir.
Start
engine and operate engagement handle
so the ram makes two complete strokes.
CAUTION
This is to purge the hydraulic system
of air. Continued operation will cause
permanent damage to pump and cyl¬
inder. Stop engine and finish filling
reservoir tank. It will take about 3
quarts of oil. See figure 4.
USING YOUR LOG SPLITTER
Your
log splitter is designed for safe, efficient,
operation. CARE, OF COURSE, MUST BE EXER¬
CISED THAT HANDS ARE KEPT AWAY FROM ALL
MOVING PARTS.
A. Set throttle at maximum speed.
B. Engagement handle has three positions: Forward-
moves ram towards wedge. Neutral - ram stops
in place. Reverse - ram returns. See figure 8.
FIGURE 8
C. Maximum length that can be split is 23"
D. Place log on beam and hold in place with right
hand. See figure 9.
5
FIGURE 9

Advertisement

Table of Contents
loading

This manual is also suitable for:

24640-7

Table of Contents