SECTION 1 - DOOR OPERATION OPENING DOOR Unlock the padlock at the Using the two handle recesses, Lift the door up until it Push the door back into the bottom of the door and remove. lift the bottom section of the reaches 90 degrees, and is body of the unit until it can go Release the lock catch from the...
SECTION 2 - SHELF KIT MOVING SHELVING LOCATION To remove a standard shelf Using a flat headed screwdriver Using a 4mm Allen key remove Grip at the edges of the shelf locate the cover caps at each gently pry off the cover cap to each fixing and cap ring.
SECTION 4 - FOAMEX DISPLAY SIGN REPLACING THE SIGN Open the unit and lock the door Position the Foamex board into Slide the cap rings and washers Using a 4mm Allen key, tighten into place using the two swing the recess on the inside of the onto to the M6 screws as shown each bolt.
Page 8
, DURAPOL & NOVA ARE TRADEMARKS OR REGISTERED TRADEMARKS OF GLASDON GROUP OR ITS SUBSIDIARIES IN THE U.K. AND OTHER COUNTRIES. A planned maintenance schedule or regular inspection is recommended, replacing components as necessary. Replacement components are available direct from GLASDON.
Need help?
Do you have a question about the NOVA STORAGE BUNKER and is the answer not in the manual?
Questions and answers