ZyXEL Communications Dimension GS-3012F Release Note page 24

11. Multiple configurations supported.
12. System configuration backup / restore in text-mode.
13. DHCP relay and relay agent information (option-82) supported.
14. Upgrade switch driver to V.4.2.6.
15. Read copper/fiber status on web.
16. Remove cluster management from web.
17. Disable web session idle timeout on web
18. Bootbase version V3.00: using new MAC prefix 00-13-49
Known Issue:
1. Filtering: In some special cases, setting one MAC with discard-source will cause device
filter all packets with this MAC, ether source MAC or destination MAC.
2. When user active LACP and RSTP, sometimes LACP is failed.
3. The system needs few minutes (under 2 mins) to complete link aggregation.
4. RFC 2889 Many to One Throughput Test failed.
Limitation of Settings:
1. VLAN 1Q static entry 256
2. Static MAC forwarding entry 256
3. MAC filtering entry 256
4. Cluster member 24
5. Management IP address 64
6. Classifier entry 128
7. Policy rule entry 128
Change History:
V3.60(LR.0)C0 (2/3/2005)
First Public version
Firmware Upgrade:
The GS-3012F uses FTP to upgrade firmware in run-time through its built-in FTP server. You
can use any FTP client (for example,
procedure is as follows:
Upgrade GS-3012F FW:
C:\> ftp <GS-3012F IP address>
User : <Enter>
Password: 1234
230 Logged in
ftp> put 360LR0C0.bin ras
ftp> bye
Where
• User name : just press <Enter>
• Password : the management password, 1234 by default
• 360LR0C0.bin : the name of firmware file you want to upgrade
• ras : the internal firmware name in GS-3012F
ftp.exe in Windows) to upgrade GS-3012F. The upgrade